
Residential
Exterior Painting
Prep, repair, prime and paint for Oklahoma weather.

Commercial painting
Daniel's Custom Painting paints offices, retail spaces and other commercial properties, inside and out, in Inola, Tulsa and nearby Oklahoma communities. Tell us the address and what needs painting. We will call you to talk through the job and a bid.
This page is for people who have to keep a property looking sharp and working. Typical situations:
We paint offices, retail spaces and other commercial properties. If your building is something else, call and ask.
Painting a house instead? See exterior painting for homes or interior painting for homes.
An occupied building needs a schedule that fits how the space is used.
Options usually include after-hours or weekend work, painting one area at a time, and low-odor products. Which of these apply depends on the job and the contractor, so ask for the plan in writing before work starts.
Protecting furniture, equipment and floors, and cleaning up at the end of each day, are normal parts of a commercial schedule. Ask any painter how they handle both.
Tell us when the space is quiet and we will talk through what is practical.
Send us the scope.Call (918) 704-5861Request a Bid
Interior and exterior work differ in surfaces, prep and timing.
Interior work in offices, shops and restaurants usually covers painted walls, ceilings, doors and frames, and trim, and sometimes metal and masonry. Prep typically means patching, caulking and sanding before paint. High-traffic areas often call for scuff-resistant, washable finishes, and low-odor products are an option when the space is occupied.
Exterior work usually covers stucco, masonry and brick, metal panels, wood trim and concrete. Prep often includes washing, scraping, caulking and priming. Oklahoma weather is hard on a building envelope, so exterior jobs are planned around dry, moderate weather. See when to paint a house exterior in Oklahoma for the same season logic.
Commercial coatings are chosen by surface and use.
| Surface | Usual coating class |
|---|---|
| Interior walls | Interior latex and acrylic finishes |
| Doors and trim | Harder-wearing finishes |
| Brick and stucco | Masonry coatings |
| Metal panels | Metal-ready primers and finishes |
Ask what product goes on each surface and read the product data sheet.
The price of a commercial job depends on the building and the schedule, not just the size.
| Factor | Why it matters |
|---|---|
| Square footage and wall height | More surface and taller walls mean more time and sometimes a lift |
| Prep and repairs | Patching, caulking, washing and wood or stucco repair come before paint |
| Coats and color changes | Dark-to-light changes and bare surfaces usually need primer and extra coats |
| Access | Lifts, scaffolding, tight sites and parking add setup |
| After-hours work | Nights and weekends can change labor cost |
| Occupied or empty | Working around people and equipment slows the work |
| Coating system | Higher-performance coatings cost more per gallon and per coat |
Check that every bid covers the same scope: the same surfaces, the same number of coats, the same products, prep and repairs included or listed as extras, the schedule, and what insurance paperwork comes with it. Ask what written coverage is part of the bid. A bid that names each area is easier to compare than a single lump sum. See how to compare painting quotes.
Ask about a walk-through.Call (918) 704-5861Request a Bid
Daniel's Custom Painting works in Inola, Claremore, Catoosa, Verdigris, Tulsa, Broken Arrow, Owasso, Jenks, Bixby and nearby communities.
Northeast Oklahoma has several large industrial and business areas. These places are geography, not a client list. See the Inola and Rogers County page for drive times and local rules, or the list of all service areas.
More sources: Wikipedia, Inola, Oklahoma, Tulsa Ports and Claremore, Oklahoma; Broken Arrow Economic Development Authority.
A few photos of commercial buildings and interiors. More are in the portfolio.




Have a property in mind?Call (918) 704-5861Request a Bid
Cost and value
Commercial bids are built from the surface area and condition, the number of coats, the type of coating, access (lifts, scaffolding or tall walls), the schedule (after-hours work often costs more) and what has to be moved, protected or repaired. Larger, repetitive spaces can cost less per square foot than small, detailed ones, and prep such as pressure washing, rust treatment and patching can be a large part of the total. A written bid should break out labor, materials, access equipment, schedule assumptions and exclusions, and state how change orders are handled. Online price ranges are national and vary widely by building type, so treat them as a starting guess only. Share building plans or photos, the work window and a walk-through date for the fastest accurate bid, and compare bids on scope rather than the bottom line. Ask for unit prices on any optional work, such as extra coats, accent walls or trim, so you can add or remove scope without rebidding.
Next step: commercial painting
Timing
Often yes. Many offices, shops and clinics paint at night or on weekends so staff and customers are not disrupted, which may add to the price. Phasing the job by area is another option. Tell the painter your operating hours, security and access rules, and when areas must be ready, and ask how furniture, equipment and odors will be handled.
Next step: commercial painting
It depends on size, access, prep and schedule. A small office or storefront can take a few days, while a multi-floor building, warehouse or exterior can take weeks. Working after hours, phasing around tenants, wet weather and drying time between coats all stretch the timeline, and a large building may need a bigger crew or several shifts. Surface prep, such as repairs and cleaning, often takes as long as the painting itself. Ask for a schedule that shows the sequence, how long each area is unavailable, when inspections or walk-throughs happen and what happens if the building changes mid-project. For occupied buildings, agree on a daily start and finish routine and a single contact for the site. A written schedule with milestones makes delays easier to manage on both sides. Ask the painter for a short written schedule you can share with tenants and staff. Ask what happens to the schedule if access is delayed.
Next step: commercial painting
Interiors in high-traffic areas such as entrances, corridors and restrooms may need a refresh more often than quiet offices, and exteriors fade, chalk and crack on a schedule tied to sun, weather and product quality. Peeling, stains, scuffs or a tired brand look are all signs. A regular inspection plan avoids costly repairs and helps budgeting.
Next step: commercial painting
Process and scope
Prep depends on the material: washing and sealing for stucco or block, rust treatment and metal primers for steel, and caulking and flexible coatings for movement joints. Tall walls need lifts or scaffolding, and exterior work is weather-dependent. Specify the substrate and the finish you want so the right primer and topcoat are priced.
Next step: commercial painting
Often, if the work is phased by area and low-odor paint is used. Ventilation, barriers, signage and a clear daily start and finish routine keep customers and staff comfortable. Noisy prep such as sanding is usually scheduled outside business hours. Ask how the painter will protect inventory, equipment and walkways.
Next step: commercial painting
Scrubbable, durable finishes: higher-sheen acrylics or enamels on walls and trim, epoxy or urethane coatings on floors and doors, and rust-inhibiting primers on metal. Restaurants and clinics may need washable, moisture-resistant finishes. The right product depends on the substrate and use, so ask for the specification and data sheet and match it to your cleaning routine.
Next step: commercial painting
Permits and rules
Oklahoma's Construction Industries Board contractor page names plumbing, electrical and mechanical work (plus roofing and inspectors) and says nothing about painting, so there is no state painting license to ask about. Cities may still require business registration, and a tenant finish-out, sign, awning or change of use can need a building permit even when painting alone does not. Permit requirements vary by city, so confirm with the building department for your address before the bid is signed.
Next step: commercial painting
Choosing a contractor
The address, building type, rough square footage or room list, current surfaces and condition, desired finishes or color schedule, the work window and any specifications or plans. A walk-through lets the painter measure, check access and note repairs. Ask for a bid that states scope, products, coats, schedule, insurance and payment terms.
Next step: contact us
General liability and workers' compensation, sometimes with higher limits, plus a certificate of insurance that names you as an additional named party if your lease or lender requires it. Property managers and owners usually ask for the certificate before work starts. Ask for it directly from the insurer, check the dates and verify the limits match your requirements.
Next step: about us
A good commercial painter should be able to show project photos, give references and describe similar jobs. Ask about the size, schedule, how issues were handled and whether the work was done while the building was occupied. Call a reference and ask whether the painter finished on time, communicated and cleaned up.
Next step: project photos
Risks and safety
It can. EPA's Renovation, Repair and Painting rule covers homes, childcare facilities and preschools built before 1978, so a daycare, preschool or pre-1978 rental needs lead-safe work practices when painted surfaces are disturbed, while most purely commercial buildings are not covered by the rule. Oklahoma's DEQ certifies firms. If your property is in a covered category, ask for the firm's certification before work.
Next step: commercial painting
Services
A commercial painting contractor paints and coats offices, shops, restaurants, apartment complexes, warehouses and other non-residential buildings, indoors and out. The work differs from home painting in scale, access equipment, finish specifications, scheduling around occupants, insurance paperwork and bidding. Prep, repairs and protection of equipment and finishes are part of the job, so ask for a written scope that covers them.
Next step: commercial painting
Offices, shops, restaurants, churches, clinics, apartments, warehouses and industrial buildings are all painted regularly, each with different needs. Retail may need quick turnaround, apartments need fast unit turns and warehouses need lifts and durable coatings. Tell the painter what the building is used for, the size and the finish you need so the bid matches.
Next step: commercial painting
Property managers often need unit turns, common areas and exterior repaints on a predictable schedule. Look for a painter who can quote per unit, work to a punch list and provide insurance and a single point of contact. Share the number of units, current condition and turnaround you expect.
Next step: commercial painting
No question matches that search. Call (918) 704-5861 or request an estimate and ask us directly.
Still have a question?Call (918) 704-5861request a bid.

Residential
Prep, repair, prime and paint for Oklahoma weather.

Residential
Careful prep, patching and clean lines on walls, ceilings, trim and doors.

Residential
Choose exterior, interior or cabinets for your home.
Send the address, what needs painting and a good number to call. Plans or a scope list can follow by email.